headstock bearings and seals honda cb175 cb 175 1974 1976 Yamaha MT-07 it has 55mm centre to

it has 55mm centre to centre mounting and 1 spade connector

Kawasaki ZX-10R (ZX1000) (2004-2014)

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Kawasaki BJ250 for the years and models shown above

These sets of brake pads will fit the front brakes on a Honda NT1100 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda GB500 for the years and models shown above

headstock bearings and seals honda cb175 cb 175 1974 1976 Yamaha MT-07 it has 55mm centre toBrand new set of headstock steering bearings and seals to fit: Honda CB 175 K (1974 1976). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CB175 for the years and models shown above. Top sized: 26mm x 48. 5mm x 15mm. Bottom sized: 27mm x 48. 5mm x 19mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require