headstock bearings and seals ktm egs400 egs 400 1996 1997 Honda ACA125 If you're having spark issues

If you're having spark issues with your Kawasaki GT750 then you've come to the right place

Kawasaki KH 500 A8 (3 Cylinder) (1976)

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CM250 for the years and models shown above

This set of front brake pads and rear brake drum shoes have been manufactured to replace the original brake sets on a Kawasaki KVF300 for the years and models shown above

This ignition coil set has been manufactured to upgrade original / standard coils or replace Dynatek coil packs on a Kawasaki GPZ1000 for the years and models shown above

headstock bearings and seals ktm egs400 egs 400 1996 1997 Honda ACA125 If you're having spark issuesBrand new set of headstock steering bearings and seals to fit: KTM EGS 400 (1996 1997). KTM EGS E 400 (1997). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a KTM EGS400 for the years and models shown above. Top sized: 29mm x 50. 25mm x 15mm. Bottom sized: 29mm x 50. 25mm x 15mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements.