NH2B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 1" Hose ID | 1-7/8" Hose OD | Brass 3RL Series Male End Sockets/Plugs 00 lbs FLX2582-0036 or FLX2582-0312

00 lbs FLX2582-0036 or FLX2582-0312 7896-250 2

1 300 bar 4350 psi 270 bar 3915 psi 300 bar 4350 psi 270 bar 3915 psi 66 bar 955 psi 66 bar 955 psi 2 39

700 Series | Hose Crimp End Connections Standard*

50" 1-3/16-12 3/4-16 1

w/Ethylene Propylene Seal H1BLV Foster - - 1/8" Brass Less Valve H1S/S Foster K1S K1B K1S/S B1DP 1/8" 303 Stainless Steel 1DSF1-SS Breco DS1F1-SS - 1/8" 303 Stainless Steel H1S/S-101 Foster - - 1/8" 303 Stainless

NH2B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 1" Hose ID | 1-7/8" Hose OD | Brass 3RL Series Male End Sockets/Plugs 00 lbs FLX2582-0036 or FLX2582-0312Overview: There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron. NOZZLE HOLDERS are sleeve type